Alesis ProLinear 720 DSP Active Monitor (1 pcs)
Description
Alesis ProLinear 720 DSP Active Monitor (1 pcs) Description
Alesis ProLinear 720 DSP Active Monitor has 16 preset programs (8 factories and 8 predefined user-variable) let you fine-tune the speaker to your monitoring needs.
A level adjustment allows the user to calibrate the input level to match other speakers. Pushing a couple of the front panel buttons causes the LCD to dynamically update and show the input level into the speaker. Calibration is easy; simply input a constant test signal (e.g. pink noise, white noise) and adjust the rear panel pot to the desired level.
HF Driver Power Amp: 40 watts RMS typical, 120 watts peak. Frequency response: 50hz – 20kHz +/- 1.5dB. Bass level -3dB @ 43hz typical,
Impedance 10k?
Inputs Nominal input level: +4dBu (-15dBFS). Maximum input level: +20dBu (7.0 Vrms)
LF Driver Power Amp: 80 watts RMS, 120 watts peak.
Max SPL 110dB at 1 meter at max input below clipping.
Description
Alesis ProLinear 720 DSP Active Monitor (1 pcs) Description
Alesis ProLinear 720 DSP Active Monitor has 16 preset programs (8 factories and 8 predefined user-variable) let you fine-tune the speaker to your monitoring needs.
A level adjustment allows the user to calibrate the input level to match other speakers. Pushing a couple of the front panel buttons causes the LCD to dynamically update and show the input level into the speaker. Calibration is easy; simply input a constant test signal (e.g. pink noise, white noise) and adjust the rear panel pot to the desired level.
HF Driver Power Amp: 40 watts RMS typical, 120 watts peak. Frequency response: 50hz – 20kHz +/- 1.5dB. Bass level -3dB @ 43hz typical,
Impedance 10k?
Inputs Nominal input level: +4dBu (-15dBFS). Maximum input level: +20dBu (7.0 Vrms)
LF Driver Power Amp: 80 watts RMS, 120 watts peak.
Max SPL 110dB at 1 meter at max input below clipping.
Description
Description
Alesis ProLinear 720 DSP Active Monitor (1 pcs) Description
Alesis ProLinear 720 DSP Active Monitor has 16 preset programs (8 factories and 8 predefined user-variable) let you fine-tune the speaker to your monitoring needs.
A level adjustment allows the user to calibrate the input level to match other speakers. Pushing a couple of the front panel buttons causes the LCD to dynamically update and show the input level into the speaker. Calibration is easy; simply input a constant test signal (e.g. pink noise, white noise) and adjust the rear panel pot to the desired level.
HF Driver Power Amp: 40 watts RMS typical, 120 watts peak. Frequency response: 50hz – 20kHz +/- 1.5dB. Bass level -3dB @ 43hz typical,
Impedance 10k?
Inputs Nominal input level: +4dBu (-15dBFS). Maximum input level: +20dBu (7.0 Vrms)
LF Driver Power Amp: 80 watts RMS, 120 watts peak.
Max SPL 110dB at 1 meter at max input below clipping.
